Login/ Register
Cart
Checkout
Shop Now
Home
About Us
Contact Us
Search for:
Search
Products
Products
LD – Low Density Pipe Fittings
–
We stock both RX Plastic and Hansen Low Density Alkathene fittings. Both are NZ made and easy fitting pipe fittings LD Pipe is typically made to imperial inside diameter measurements. If in doubt compare these sizes to identify the poly pipe you are working with. (Metric OD pipe is easier to identify as sized by accurate Outside Diameter measurements.) Typical LD measurements- LD – Outside Diameter mm / Internal Diameter mm 15mm – 17 / 12.2 20mm – 25. / 18.5 25mm – 31.5 / 25 32mm – 37.8 / 31.2 40mm – 44.1 / 37.5 50mm – 56.8 / 50.2 there is also a limited range of fittings in 45mm to cover the gap between 40 and 50mm and mainly used for effluent lines.
LD STRAIGHT COUPLERS
LD MALE COUPLERS
LD FEMALE COUPLERS
LD BENDS
LD MALE BENDS -SHORT
LD FEMALE BENDS
LD BRACKET ELBOWS
LD TEES
LD FEMALE TEES
LD Reducer Tees
Close
Metric Compression Fittings
–
Easy to use fittings measured by the outside diameters in Metric sizes. These fittings are manufactured by a ISO 9001 accredited Germany manufacturer and bear the German quality mark of DVGW. • Long cap threads for EASY INSTALLATION • High quality ‘Lip’ seal for EASY INSTALLATION • Fittings up to 63mm rated to PN16, fittings from 75mm to 110mm rated to PN10 • Excellent for use on water lines ,Effluent pipe, compressed air lines plus many more • UV RESISTANT and Chemical resistant materials A SUPERIOR FITTING BY DESIGN -use with confidence! These fittings are certified for AS/NZS4129 and AS/NZS4020 and the highest European standards including the world renown DVGW and British standards. To suit metric HDPE/MDPE pipe manufactured to AS/NZS4130. Pressure Rating: Sizes Ø 20mm O.D. to Ø 63mm O.D. – 16bar @ 20°C. Sizes Ø 75mm O.D. to Ø 110mm O.D. – 10bar @ 20°C. Possibly the easiest fittings to size but not to be confused with ID (internal measurements) ie -common mistake is ordering 50mm pipe and visualizing internal measurements- actually needs 63mm to compare the same diameter and flows.
Couplers
COMPRESSION STRAIGHT COUPLERS
COMPRESSION MALE COUPLERS
COMPRESSION FEMALE COUPLERS
COMPRESSION SLIDE-FIX COUPLER
Close
Elbows
METRIC OD 90° ELBOWS
COMPRESSION MALE ELBOWS
COMPRESSION FEMALE ELBOW
COMPRESSION TAKE-OFF ELBOW
COMPRESSION BRACKET ELBOW
Close
Tees
COMPRESSION REDUCER FEMALE TEES
COMPRESSION TEES
COMPRESSION MALE TEE
COMPRESSION FEMALE TEES
COMPRESSION REDUCING TEE
Close
Reducing
COMPRESSION REDUCER FEMALE TEES
COMPRESSION REDUCER FEMALE COUPLERS
COMPRESSION REDUCER MALE COUPLERS
COMPRESSION REDUCING TEE
COMPRESSION REDUCING COUPLER
Close
Spares and Accessories
O’ RING GASKET
CAP WRENCH
Close
Close
RX Compression Fittings
–
These are external compression fittings having no obstructions inside the pipe- giving maximum flows for MDID pipe and most LD alkathene pipe Measured by the internal diameter in pipe using traditional imperial sizes. ( Inch, 3/4 etc.) 20mm, 25mm etc Very efficient gripping rings on the pipe exterior walls gives good internal flows note -50mm compression fitting dont fit all LD 50mm- just MDID pipe. note -40mm pipe and fittings are only made for approx. 38mm
COMPRESSION COUPLERS
COMPRESSION MALE COUPLERS
COMPRESSION FEMALE COUPLERS
COMPRESSION BENDS
COMPRESSION FEMALE BENDS
COMPRESSION TEES
COMPRESSION FEMALE TEES
Close
Threaded BSP Fittings
–
Complete range of Threaded BSP Fittings available from 15mm – 100mm
316 Stainless Steel BSP
–
Stainless steel fitings have replaced many brass fitting in street ware. Tapered BSP threads for ease of use and available in most configurations including 45 degree bends and Y tees.
BSP REDUCING NIPPLE
BSP END CAPS
BSP M/F STREET ELBOW 45 Degree
BSP END PLUGS
BSP Y TYPE TEE
BSP ELBOW
BSP FEMALE TEE
BSP REDUCING BUSH
BSP REDUCING SOCKET
BSP SOCKET
BSP BARRELL NIPPLE
BSP NIPPLE
Close
Plastic / Nylon BSP
–
Predominantly Hansen Threaded fittings available in most sizes to match most situations. If under sideways pressure loadings consider stainless steel long term.
1000Ltr IBC Thread Adapter
TANK FITTING- TAIL
POLY PROP RISERS BSP
TANK FITTING – M/F
END HEX CAPS
END HEX PLUGS
THREADED MAC UNION
BSP MALE/FEMALE ELBOW
BSP FEMALE ELBOW
BSP FEMALE TEE
BSP REDUCING BUSH
BSP REDUCING SOCKET
BSP SOCKET
BSP REDUCING NIPPLE
BSP NIPPLE
Close
Close
Crimp Fittings
Secura Gold
–
Secura Gold crimp fittings are the choice for professional plumbers. The simple design and proven use of high performance materials delivers long term results that can be relied on. Combine this with fast installation, no fuss jointing, great flexibility, adaptability lower installation costs and job satisfaction.
Secura Wingback Elbow – Male
Crox Tee Adapter
Brass Hose Plate
Manifolds
Secura Gold Couplings
Secura Male
Secura Female Swivel
Secura Elbows
Secura Swivel Elbow
Secura Tee
Secura Reducing Connector
Plugged Nipple
Secura Blank Plug Brass
Polybutylene Pipe
Brazing Tail
Secura Wingback Elbows – Female
Copper Crimp Rings
Pipe Clip (Grey)
Insulation
Close
Close
PVC Stormwater Fittings
–
Solvent Jointed PVC Stormwater Fittings manufactured for NZ conditions and in stormwater sizes to handle NZ rainfall.
Stormwater Sockets
Stormwater Junctions
Stormwater Bends
Stormwater Reducers
Stormwater Level Inverts
Downpipe Adaptors
Stormwater Saddles
End Caps
Kerb Outlets – round to rectangle
Sump Outlets
Flap Valves
Close
DWV – Drain, Waste & Vent
–
Order from this complete range of high quality DWV pipe fittings to meet all domestic and commercial drain laying needs. NZ and Australian made brands only supplied for consistent quality and reliability for long term results. DWV- drain, waste and vent fittings in stock with a huge range of reducers, junctions and couplers to meet your project requirements. 32mm to 150mm DWV Pipe also available. these DWV pipe fittings are also suitable for stormwater pipe and match flexible drainage pipes diameters if required for soak-age fields etc.
Bends
100mm -150mm DWV Bends male/ female
100mm-225mm DWV Bends female/ female
32mm-80mm DWV Bends female/ female
Adjustable Bends
Close
Sockets
Threaded Sockets Male BSP
Threaded Sockets – Female
Quick Repair Couplings
Expansion Couplings
Push on end cap
Screw on end cap
Screw cap & Base
Slip Sockets RRJ
Sockets
Close
DWV Reducers
–
DWV level invert reducers have many uses for reducing pipe diameter and minimizing flow/ restriction in waste water, storm water and air ducting . PVC material with male / female ends. Off center moldings design to direct flow along one edge. Larger diameter Level inverts are available in the Storm water range.
Reducing Bushes
Level Invert reducers
Close
Inspections
Straight Inspections
Inspections Bends
Inspection Junctions
Close
Junction
Access Junctions
Saddle Junctions
Junctions – reducing
DWV Junctions
Close
Adaptors
Adaptors
PLUMQUICKS- CLAY – PVC
PLUMQUICKS – PVC- PVC
Downpipe Adaptors
Close
Other
S P Traps
Air Outlets
Gully Traps
Reflux Valve
Close
Close
PVC Pressure
–
Solvent jointed PVC pipe fittings for PVC Pressure pipe. made to NZ standards where applicable. PN 16 rated glue joint fittings. These require a specialised primer and glue combination to ensure the best bond. Not to be confused with Stormwater or DWV glue specifications.
Sockets and Couplers
PVC REDUCING SOCKET
PVC VALVE SPIGOT
PVC VALVE SOCKET
PVC FAUCET ADAPTOR
PVC SOCKET UNION
PVC THREADED UNION
PVC STRAIGHT COUPLER
PVC COMPRESSION COUPLING
FAUCET COUPLING
Close
Elbows
PVC 90° FAUCET ELBOW
PVC 90° ELBOW
PVC 45° ELBOW
Close
Tees
PVC CROSS
PVC FAUCET TEE
REDUCING FAUCET TEE
PVC REDUCING TEE
PVC PRESSURE TEE
Close
Other
PN PIPE CLIPS
FLANGES
PVC REDUCING BUSH
PVC PN END CAPS
Close
PVC Hose Tails
PVC Hose Tails
Close
Close
Camlocks
–
Heavy duty NZ made Aluminium GP camlocks for most situations. WAM brand for added strength and stability with most combinations of connections available to connect your requirements. Polypropylene Camlocks also available if more suited.
Aluminium Camlocks
–
These are heavy duty WAM GP fittings – NZ made. More metal – compare the weight. We can supply also a lightweight imported aluminium range available at a lesser price.
Dust Cap
Dust Plug
Hosetail Adaptor
Male Adaptor
Female Thread Coupler
Hosetail Coupler
Male Coupler
Close
Polypropylene Camlocks
Male Adaptor
DUST CAP
Dust Plug
Female Thread Coupler
Hosetail Adaptor
Female Adaptor
Male Coupler
Hosetail Coupler
Close
Ag / Effluent Camlocks
–
AG couplings are coded as standard camlock sizes with the tail to fit OD pipe
AG Male Hosetail Adaptors
AG Double Hosetail
AG HOSE CLAMP
AG Hosetail Female Coupler
Close
Stainless Steel Camlocks
Dust Cap
Dust Plug
Female Thread Coupler
Hosetail Adaptor
MALE THREAD ADAPTOR GP CAMLOCK
Male Coupler
Hosetail Coupler
Female Adaptor
Close
Camlock Accessories
S/S Heavy Duty Clamps
S/S Norma Hose clips
Buna Camlock Washer
Close
Close
Tapping Bands /Couplers
Connectors
Connectors
Repair Clamps
Gibaults
Close
Tapping Bands
Bronze Tapping Saddles
PE Tapping saddle
PVC Tapping saddles
COMPRESSION Tapping Saddles
Close
Close
Valves
Ball Valves
Brass Ball Valve T Handle M/F
Brass Ball Valve T Handle F/F
Brass Ball Valve M/F
PVC Ball Valves
Brass Ball Valve F/F
Close
Frost Free Ball Valves
Frost Free Ball Valves
Close
Gate Valve
Bronze inground Gate Valve
Bronze Gate Valves
Close
Check Valves
S/S Check Valve Screen
Hansen Foot Valve
Hansen Check Valve
Plastic Check Valve
Check Valve
Close
Butterfly Valve
Brass Butterfly Valves
Close
PVC Slide Valves
PVC Slide Valves
Close
Trough Valves
Hansen Reservoir Valve
Hansen Maxflo Diaphragm Valve
Hansen Superflo Piston Valve
Apex Trough Valve with Camlock
Apex Brass Body Ballcock
Apex Acetyl Ballcock
Close
Nozzles
Wash Down Nozzles
Close
Close
Valve Accessories
WATER METERS
PRESSURE GAUGE
PRESSURE SWITCH
PLUMBING VALVES
Close
Culvert Deals
–
$500 CULVERT ORDERS ARE FREIGHT FREE NZ WIDE. Extra strong European made Culverts from 250mm to 2150mm diameter. let us quote your project requirements.
Farm Culverts
Go-in System
Civil Culverts
Close
Pipes and Hoses
–
Our range of stock includes PVC pressure pipe, suction and delivery hose, poly pipe etc. Let us quote on your needs. Contact us through the contact page.
Wash Down Nozzles
Close
Your Cart
Login
Username
Password
Remember Me
Register
Lost Password
Help
Home
/
DWV - Drain, Waste & Vent
/
Adaptors
/ Adaptors
Adaptors
Adaptors
$
15.70
–
$
67.20
excl GST
Enquire about this product
SKU:
dwv21
.
Categories:
DWV - Drain, Waste & Vent
,
Adaptors
.
Related products
Straight Inspections
$
20.60
–
$
79.20
excl GST
Select options
Air Outlets
$
2.60
–
$
28.10
excl GST
Select options
Level Invert reducers
$
7.00
–
$
39.60
excl GST
Select options
Reducing Bushes
$
3.60
–
$
16.20
excl GST
Select options
SKU
Size
Price
Quantity
Add to Cart Button
AU124-100
DWV 100mm PVC Adaptor to fit E/W Socket
$
20.40
excl GST
Add to cart
AU124-150
DWV 150mm PVC Adaptor to fit E/W Socket
$
67.20
excl GST
Add to cart
AU125-100
DWV 100mm PVC Adaptor fit over E/W Pipe female end
$
15.70
excl GST
Add to cart
AU125-100F
DWV 100mm PVC Adaptor fit over E/W Pipe male end
$
22.30
excl GST
Add to cart
AU125-150
DWV 150mm PVC Adaptor to fit over E/W Pipe
$
51.20
excl GST
Add to cart
AU126-100
DWV 100mm PVC Adaptor to fit into E/W Pipe
$
18.80
excl GST
Add to cart
