Login/ Register
Cart
Checkout

Home
Shop
About Us
Contact Us

Products

LD – Low Density Pipe Fittings – We stock both RX Plastic and Hansen Low Density Alkathene fittings. Both are NZ made and easy fitting pipe fittings LD Pipe is typically made to imperial inside diameter measurements. If in doubt compare these sizes to identify the poly pipe you are working with. (Metric OD pipe is easier to identify as sized by accurate Outside Diameter measurements.) Typical LD measurements- LD – Outside Diameter mm / Internal Diameter mm 15mm – 17 / 12.2 20mm – 25. / 18.5 25mm – 31.5 / 25 32mm – 37.8 / 31.2 40mm – 44.1 / 37.5 50mm – 56.8 / 50.2 there is also a limited range of fittings in 45mm to cover the gap between 40 and 50mm and mainly used for effluent lines.
Metric OD Fittings – Easy to use fittings measured by the outside diameters in Metric sizes. These fittings are manufactured by a ISO 9001 accredited Germany manufacturer and bear the German quality mark of DVGW. • Long cap threads for EASY INSTALLATION • High quality ‘Lip’ seal for EASY INSTALLATION • Fittings up to 63mm rated to PN16, fittings from 75mm to 110mm rated to PN10 • Excellent for use on water lines ,Effluent pipe, compressed air lines plus many more • UV RESISTANT and Chemical resistant materials A SUPERIOR FITTING BY DESIGN -use with confidence! These fittings are certified for AS/NZS4129 and AS/NZS4020 and the highest European standards including the world renown DVGW and British standards. To suit metric HDPE/MDPE pipe manufactured to AS/NZS4130. Pressure Rating: Sizes Ø 20mm O.D. to Ø 63mm O.D. – 16bar @ 20°C. Sizes Ø 75mm O.D. to Ø 110mm O.D. – 10bar @ 20°C. Possibly the easiest fittings to size but not to be confused with ID (internal measurements) ie -common mistake is ordering 50mm pipe and visualizing internal measurements- actually needs 63mm to compare the same diameter and flows.
RX Compression Fittings – These are external compression fittings having no obstructions inside the pipe- giving maximum flows for MDID pipe and most LD alkathene pipe Measured by the internal diameter in pipe using traditional imperial sizes. ( Inch, 3/4 etc.) 20mm, 25mm etc Very efficient gripping rings on the pipe exterior walls gives good internal flows note -50mm compression fitting dont fit all LD 50mm- just MDID pipe. note -40mm pipe and fittings are only made for approx. 38mm
Threaded BSP Fittings – Complete range of Threaded BSP Fittings available from 15mm – 100mm
Crimp Fittings
- Secura Gold – Secura Gold crimp fittings are the choice for professional plumbers. The simple design and proven use of high performance materials delivers long term results that can be relied on. Combine this with fast installation, no fuss jointing, great flexibility, adaptability lower installation costs and job satisfaction.
- Close
PVC Stormwater Fittings – Solvent Jointed PVC Stormwater Fittings manufactured for NZ conditions and in stormwater sizes to handle NZ rainfall.
DWV – Drain, Waste & Vent – Order from this complete range of high quality DWV pipe fittings to meet all domestic and commercial drain laying needs. NZ and Australian made brands only supplied for consistent quality and reliability for long term results. DWV- drain, waste and vent fittings in stock with a huge range of reducers, junctions and couplers to meet your project requirements. 32mm to 150mm DWV Pipe also available. these DWV pipe fittings are also suitable for stormwater pipe and match flexible drainage pipes diameters if required for soak-age fields etc.
PVC Pressure – Solvent jointed PVC pipe fittings for PVC Pressure pipe. made to NZ standards where applicable. PN 16 rated glue joint fittings. These require a specialised primer and glue combination to ensure the best bond. Not to be confused with Stormwater or DWV glue specifications.
Camlocks – Heavy duty NZ made Aluminium GP camlocks for most situations. WAM brand for added strength and stability with most combinations of connections available to connect your requirements. Polypropylene Camlocks also available if more suited.
Tapping Bands /Couplers
- Connectors
  - Connectors
  - Repair Clamps
  - Gibaults
  - Close
- Tapping Bands
- Close
Valves
Valve Accessories
Culvert Deals – $500 CULVERT ORDERS ARE FREIGHT FREE NZ WIDE. Extra strong European made Culverts from 250mm to 2150mm diameter. let us quote your project requirements.
- Farm Culverts
- Go-in System
- Civil Culverts
- Close
Pipes and Hoses – Our range of stock includes PVC pressure pipe, suction and delivery hose, poly pipe etc. Let us quote on your needs. Contact us through the contact page.
- Wash Down Nozzles
- Close

Search for:

Your Cart

Login

Username

Password

Remember Me

Register
Lost Password

Help

Terms & Conditions
Sitemap
Contact Us

Contact Us

To contact us at Pipe Fittings Online please phone 0508 FITTINGS

or use the enquiry form.

Thank You

The team at Pipe Fittings Online

Your Name (required)

Phone Number

Your Email (required)

Subject

Your Message

Terms & Conditions
Sitemap
Contact Us

2018 Pipe Fittings Online. All rights reserved.